Yamaha oil | Outboard Motor Oil - Part 5

Fate Favors the Prepared Boater

As you can probably imagine, I’m always a little over prepared whenever I take my boat out. And the ironic thing is that the ones who are prepared usually aren’t the ones who need the extra supplies out at sea. In fact, I’ve definitely stopped and assisted boaters more times than I’ve had trouble on the water myself. Just last weekend my son and I had to take a quick break from our bass fishing in order to give a family some assistance.

You could tell the guy hadn’t owned a boat long, as the license stickers still had their showroom sheen. It was evident that his wife was more than a little peeved. The boat was just bobbing along and the engine was sputtering, so my son and I coasted over, and I told him to cut the engine. After asking him a few questions I was quickly able to diagnose the problem; he hadn’t mixed any outboard motor oil with the fuel and the unit for overheating. Since I always have extra two-cycle oil on board, I gave him some and showed him how to mix it safely.

Did you like this? Share it:

Basic Boat Trailering: Part Three

Yesterday we covered how to launch your boat at the dock, so today it’s time for the other half of the equation: getting your vessel back on the trailer. Although the two tasks are similar, many people get into trouble during this part. The easiest method is to use two people.

Start by dropping someone off at the dock to go get the vehicle; I recommend leaving the most experienced boater at the helm. Once you drop the person off, cruise around the no wake zone until they return with the car and trailer. After they’ve backed the trailer into the water, approach it head-on with the boat. Here is where most people go wrong; they cut the engine too soon, meaning the boat has to be guided by hand onto the trailer. Instead, coast in slowly and cut the engine after you have some momentum built up. Have the driver waiting at the trailer to quickly secure the boat. Before you leave the ramp, make sure your skis, flags, Yamaha 2W oil and other supplies are tied down and secure.

Did you like this? Share it:

Environmentally Safe Boating: Part One

With tens of thousands of barrels of oil gushing into the Gulf of Mexico everyday, people around the country have suddenly taken more interest in environmental issues, particularly as they pertain to the water. If you have been boating for years, chances are you were already well aware of the myriad risks that constantly threaten lakes, streams, rivers and oceans. And while you may not be able to produce a disaster on the scale of the BP spill, gasoline and outboard motor oil from your vessel are still a hazard to the environment.

To that end, it is imperative to take the proper precautions when changing your oil, fueling or handling other potential dangerous substances, particularly when you are around the water. As you can imagine, cleaning up spilled gas or oil from water is virtually impossible. Over the next few days we will be covering some of the basics on how to protect the environment and abide by federal and local laws.

Did you like this? Share it: