Tips to Choose the Right Outboard Motor Oil and Fuel

If you want to keep having water adventures in your boat, you need to keep your boat’s engine in good working condition. For that, you need to use the right type of outboard motor oil and fuel to increase its lifespan and improve its performance. Does your boat have a two-stroke or four-stroke outboard engine? Your choice of oil and fuel depends on the type of outboard engine your boat has, as each system functions differently. You can combine oil with fuel in a two-stroke outboard engine to lubricate it. The oil burns with the fuel and goes out of the exhaust system. The oil lubricates a four-stroke outboard engine, and the oil is continuously pumped from the sump and returned to it. The latest outboard motor oil engine models are environmentally friendly with long lifespans and decreased emissions.

These state-of-the-art technologies place a lot of pressure on the engine’s lubricants, hence making it critical to select the right oil and fuel for your boat’s engine. You shouldn’t use car motor oil in a four-stroke boat engine. The main concern boat owners have corrosion due to their watercraft being in the water constantly, and a normal car motor oil can’t handle the water. If used, it will corrode your boat’s engine. Four-stroke engines also perform faster than automobile engines and spend a lot of time operating at high speed. Boat engines can stay in good condition for a long duration during the time your boat is not in use. You’ll need to use an outboard motor oil that comes recommended by the manufacturer of the engine.

You can also buy oil with the logo of the National Marine Manufacturers Association (NMMA). The association tests and certifies oils to make sure they meet the needs of the outboard engine. To determine the correct outboard motor oil, use the following list — TC-W3 oils for two-stroke engines, FC-W for four-stroke engines, and FC-W catalyst compatible for four-stroke engines with an exhaust after-treatment substance. Next, you need to use the right fuel. Sticking to using E10 or 10-percent ethanol is recommended because E15 or 15 percent ethanol can damage your boat’s engine, and it also exceeds the standards established by the Environmental Protection Agency (EPA). For retailers choosing to sell E15, they need to put warning labels at their fuel pump. For this reason, pay attention to the type of fuel you’re adding to your boat. It’s good to inform you, so you can make your boat’s engine last several years.

Did you like this? Share it:

Treat Your New Boat Right with the Best Outboard Motor Oil

Congratulations! You’ve bought a boat that you love and you’re excited for all of the trips that you’re going to be taking on it. An outboard motor means that you don’t have to rely on your own muscles to get you around your favorite lakes and rivers; you can cruise right out to the best fishing spots and cast without even breaking a sweat. A new boat is an excellent investment that feels great, especially when you take it out for the first time and feel that engine purring away. But while you’re celebrating, don’t forget that nothing stays new forever; good upkeep is going to be what keeps your investment like new. But don’t be intimidated by the hurtles of taking good care of your new boat, because we’re here to help you make all the important choices. Today, let’s look at choosing the best outboard motor oil for your new purchase.

The first thing you will want to look for in any motor oil is a certification from the National Marine Manufacturers Association. The NMMA is around to help boat manufacturers comply with all of the rules and regulations for boating safety and construction standards, so customers that see the NMMA certification can feel good about the rigorous testing and compliance requirements that the products had to go through. When it comes to oil, only the best outboard motor oil is certified by the NMMA, so it’s always worth it to look for that reassurance when you’re shopping for your new boat’s oil.

Next, be sure that you are selecting the right oil for your type of engine. A two-stroke engine needs TC-W3 oil and a four-stroke engine needs FC-W oil to function at its very best. Not sure what you have? Take a look at your manual or look it up online to make sure! Choosing name-brand oil like Yamalube, Mercury or Yamalube is going to help your outboard engine to function well with regular maintenance, as long as you follow a strict schedule and don’t skimp. Top-quality oil is especially important for marine engines because they deal with more stress than your regular car. After all, a boat goes through lots of tough conditions, including moisture, corrosion and carbon deposits, along with being used at higher operating speeds than most cars. You also take your boat out of the water during the off seasons, meaning big periods of sitting without running. Limit damage to your engine with fabulous outboard engine oil.

Did you like this? Share it:

Ultimate Guide to Boat Motor Oil

Outboard oil for the boat isn’t similar to the oil which is used for the car engines. The auto engine is usually used on a daily basis while the outboard motor might sit free for several days. The 4 stroke oil is used for the boats that are kept in damp and salty environments contrary to a car. The ideal 4 stroke oil for the boats is Pennzoil 5063875 because its formula makes sure that the engine does run clean while running at varying temperatures. Also, a car has so many gears, which mean that it could cruise along in the overdrive at about 2,000 revs. But, the boat that is under load would be revved out a bit higher for long periods that means this needs more lubrication.

The outboard is not a little investment. Nowadays, engines are tuned intricately to run efficiently within very tough tolerances and most engineers formulate oil, especially to increase the performance and efficiency of the engines. This is the reason why oils that are formulated through the real equipment manufacturer are preferred. Also, Evinrude E-Tec is the cleanest and efficient burning outboard oil the Evinrude has made till date. The engines are also made for running on the XD100 oil. The E-Tec might be programed in order to run on the XD50. While programed in such manner, the consumption of oil would go up. Sometimes, owners see that the extra cost of XD100 oil is just offset by a decline in oil consumption. In case the E-Tec is to use the XD100, then don’t use XD50! It’s formulated just as the TC-W3 certified oil. It’s certified for the direct injection engines as well. This oil is the TC-W3 certified. It’s approved for the pre-mix applications. Mercury Optimax Outboards are also intended for performance and competence and is used in direct fuel injected engines which require special oil formulations.

Before the development of boat motor oil, it’s suggested that the Premium Plus will run in the Optimax outboards; however, it’s since altered to the high-quality Optimax Oil. The Premium Plus is formulated for the direct fuel injected engine. This also exceeds or meets all personal watercraft and outboard manufacturers’ recommendations to use the TC-W3 and TC-W2 in the direct injection two-cycle applications. This boat motor oil is surely one of the best oils available on the market. In addition, the instructions are very simple to understand for anyone who knows a little.

Did you like this? Share it: