Immediately following every outing you should run through a short checklist to ensure your motor wasn’t damaged and will be ready for your next outing. The first line of business is to flush the engine. For this you’ll need a set of rabbit ears, which is a pair of rubber hoses connected by a metal clamp. The apparatus slips on to the lower unit where you can attach the garden hose.
When you’re flushing the engine, ensure that the water flowing through the system isn’t hot. If the water is hot or the flow is weak, it’s an indication that some debris is blocking the system. You can easily remove the blockage by inserting a small piece of wire into the flow tube. Once the engine has been flushed, spray down everything with some lubricant. Finish by topping off your tank with a mixture of fuel and Evinrude XD100.