Today we pick up right where we left off in our preseason snowmobile maintenance process: the visual inspection. Having checked for cracks in the hood, we now turn our attention to the upholstery. Seat covers may become nicked and scratched with use, and in some cases they might slip right off the mounting. These details might seem trivial or superficial, and it’s true that your snow machine can operate no matter the state of the seating. Now is a good time to shore up any aesthetic flaws, however. Try gluing a similar fabric underneath hole in the leather or synthetic seating.
Now it’s time to get a look at the underbody of your snowmobile – specifically, the track and the rear suspension. Check for bent or broken suspension parts and ensure that the sliders haven’t deteriorated. When inspecting the track, think about it the same way you would the tires on a car. The slightest sign of wear is more than enough evidence in favor of replacement. Driving with a worn track is basically tempting fate; you could end up walking several miles back to civilization through deep snow.
Tip the sled onto its side to get a glance at the skis and runners. Again, you simply have to check these parts for serious signs of wear. Steel skis should last you many years provided they aren’t bent or allowed to corrode. Plastic skis could be cut or otherwise impacted rather easily, so check them with added prejudice. If you haven’t already done so, top off the engine with Yamalube 2s oil. Tomorrow we’ll go under the hood!